#! /bin/sh
# iproute2 version, default updown script
#
# Copyright (C) 2003-2004 Nigel Metheringham
# Copyright (C) 2002-2007 Michael Richardson <mcr@xelerance.com>
# Copyright (C) 2003-2013 Tuomo Soini <tis@foobar.fi>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#

# CAUTION:  Installing a new version of Libreswan will install a new
# copy of this script, wiping out any custom changes you make.  If
# you need changes, make a copy of this under another name, and customize
# that, and use the (left/right)updown parameters in ipsec.conf to make
# Libreswan use yours instead of this default one.

test $IPSEC_INIT_SCRIPT_DEBUG && set -v -x

LC_ALL=C
export LC_ALL

# things that this script gets (from ipsec_pluto(8) man page)
#
#
#	PLUTO_VERSION
#		indicates  what  version of this interface is being
#		used.  This document describes version  1.1.   This
#		is upwardly compatible with version 1.0.
#
#	PLUTO_VERB
#		specifies the name of the operation to be performed
#		(prepare-host, prepare-client, up-host, up-client,
#		down-host, or down-client).  If the address family
#		for security gateway to security gateway communications
#		is IPv6, then a suffix of -v6 is added to the
#		verb.
#
#	PLUTO_CONNECTION
#		is the name of the  connection  for  which  we  are
#		routing.
#
#	PLUTO_CONN_POLICY
#		the policy of the connection, as in:
#		RSASIG+ENCRYPT+TUNNEL+PFS+DONTREKEY+OPPORTUNISTIC+failureDROP+lKOD+rKOD
#
#	PLUTO_NEXT_HOP
#		is the next hop to which packets bound for the peer
#		must be sent.
#
#	PLUTO_INTERFACE
#		is the name of the ipsec interface to be used.
#
#	PLUTO_ME
#		is the IP address of our host.
#
#	PLUTO_MY_CLIENT
#		is the IP address / count of our client subnet.  If
#		the  client  is  just  the  host,  this will be the
#		host's own IP address / max (where max  is  32  for
#		IPv4 and 128 for IPv6).
#
#	PLUTO_MY_CLIENT_NET
#		is the IP address of our client net.  If the client
#		is just the host, this will be the  host's  own  IP
#		address.
#
#	PLUTO_MY_CLIENT_MASK
#		is  the  mask for our client net.  If the client is
#		just the host, this will be 255.255.255.255.
#
#	PLUTO_MY_SOURCEIP
#		if non-empty, then the source address for the route will be
#		set to this IP address.
#
#	PLUTO_MY_PROTOCOL
#		is the protocol  for this  connection.  Useful  for
#		firewalling.
#
#	PLUTO_MY_PORT
#		is the port. Useful for firewalling.
#
#	PLUTO_PEER
#		is the IP address of our peer.
#
#	PLUTO_PEER_CLIENT
#		is the IP address / count of the peer's client subnet.
#		If the client is just the peer, this will be
#		the peer's own IP address / max (where  max  is  32
#		for IPv4 and 128 for IPv6).
#
#	PLUTO_PEER_CLIENT_NET
#		is the IP address of the peer's client net.  If the
#		client is just the peer, this will  be  the  peer's
#		own IP address.
#
#	PLUTO_PEER_CLIENT_MASK
#		is  the  mask  for  the  peer's client net.  If the
#		client   is   just   the   peer,   this   will   be
#		255.255.255.255.
#
#	PLUTO_PEER_PROTOCOL
#		is  the  protocol  set  for  remote  end  with port
#		selector.
#
#	PLUTO_PEER_PORT
#		is the peer's port. Useful for firewalling.
#
#	PLUTO_CONNECTION_TYPE
#
#	PLUTO_MY_REF/PLUTO_PEER_REF
#		KLIPSng(mast) references to the SA to be used in each
#		direction.
#
#	PLUTO_STACK
#		The kernel level IPstack used (see protostack=)
#
#	PLUTO_SA_REQID
#		When using KAME or XFRM/NETKEY, the IPsec SA reqid value

case $PLUTO_VERSION in
    1.*)
	# Older Pluto?!?  Play it safe, script may be using new features.
	echo "$0: obsolete interface version \"$PLUTO_VERSION\"," >&2
	echo "$0: 	called by obsolete Pluto?" >&2
	exit 2
	;;
    2.*)
	;;
esac

if [ -x @IPSEC_EXECDIR@/_updown.${PLUTO_STACK} ]; then
    exec @IPSEC_EXECDIR@/_updown.${PLUTO_STACK} $*
else
    echo "FATAL: Could not execute @IPSEC_EXECDIR@/_updown.${PLUTO_STACK} $*"
fi

exit 3