north:~#
 TESTNAME=x509-pluto-05
north:~#
 ipsec setup start
ipsec_setup: Starting Libreswan IPsec VERSION
north:~#
 /testing/pluto/bin/wait-until-pluto-started
north:~#
 ipsec auto --add north-east-x509-pluto-02
north:~#
 echo done
done
north:~#
 ipsec auto --up north-east-x509-pluto-02
104 "north-east-x509-pluto-02" #1: STATE_MAIN_I1: initiate
003 "north-east-x509-pluto-02" #1: received Vendor ID payload [Libreswan 
003 "north-east-x509-pluto-02" #1: received Vendor ID payload [Dead Peer Detection]
106 "north-east-x509-pluto-02" #1: STATE_MAIN_I2: sent MI2, expecting MR2
108 "north-east-x509-pluto-02" #1: STATE_MAIN_I3: sent MI3, expecting MR3
004 "north-east-x509-pluto-02" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_RSA_SIG cipher=oakley_3des_cbc_192 prf=oakley_md5 group=modp1536}
117 "north-east-x509-pluto-02" #2: STATE_QUICK_I1: initiate
004 "north-east-x509-pluto-02" #2: STATE_QUICK_I2: sent QI2, IPsec SA established
north:~#
 

north:~#
north:~#
 ipsec setup stop
IPSEC EVENT: KLIPS device ipsec0 shut down.
ipsec_setup: Stopping Libreswan IPsec...
north:~#
 kill `cat /var/run/klogd.pid`; cat /tmp/klog.log
klogd 1.3-3#33.1, log source = /proc/kmsg started.
north:~#
 halt -p -f
Power down.