# /etc/freeswan/ipsec.conf - FreeS/WAN IPsec configuration file

# More elaborate and more varied sample configurations can be found
# in FreeS/WAN's doc/examples file, and in the HTML documentation.



# basic configuration
config setup
	# THIS SETTING MUST BE CORRECT or almost nothing will work;
	# %defaultroute is okay for most simple cases.
	interfaces=%defaultroute
	# Debug-logging controls:  "none" for (almost) none, "all" for lots.
	klipsdebug=none
	plutodebug=none
	# Use auto= parameters in conn descriptions to control startup actions.
	plutoload=%search
	plutostart=%search
	# Close down old connection when new one using same ID shows up.
	uniqueids=yes



# defaults for subsequent connection descriptions
# (these defaults will soon go away)
conn %default
	keyingtries=0
	disablearrivalcheck=no
	authby=rsasig
	leftrsasigkey=%dns
	rightrsasigkey=%dns


# connection description for opportunistic encryption
# (requires KEY record in your DNS reverse map; see doc/opportunism.howto)
conn me-to-anyone
	left=%defaultroute
	right=%opportunistic
	keylife=1h
	rekey=no
	# for initiator only OE, uncomment and uncomment this 
	# after putting your key in your forward map 
	#leftid=@myhostname.example.com
	# uncomment this next line to enable it
	#auto=route


# sample VPN connection
conn sample
	# Left security gateway, subnet behind it, next hop toward right.
	left=10.0.0.1
	leftsubnet=172.16.0.0/24
	leftnexthop=10.22.33.44
	# Right security gateway, subnet behind it, next hop toward left.
	right=10.12.12.1
	rightsubnet=192.168.0.0/24
	rightnexthop=10.101.102.103
	# To authorize this connection, but not actually start it, at startup,
	# uncomment this.
	#auto=add